1 pieces 7.25
2-4 pieces 6.75 ea
5-9 pieces 6.25 ea
10+ pieces 6.00 ea
LiteRays LED projection LitePods project 7 different dazzling colors: red, green, blue, light yellow,
Cyan, pink and white. There is also a multimode color changing setting where the glass will slowly phase through all of the colors automatically. Simply push down on the pod to cycle through each color setting. This particular model projects a flames pattern all around the base of the pod. It runs on 2 common CR2032 batteries which are easily replaceable by removing the 2
screws and pulling away the silicone cover from the electronics. LiteRays are best enjoyed in a low light or dark environment.
Each pod comes with its own 'sticky pad' which can be adhered easily to any smooth flat surface, such as a wall, cabinets, or as most use them for; the bottom of a drinking glass. Best of all, the sticky pad can be cleaned and reused, so there is never a need to buy replacements. Simply remove the sticky pad from the pod and run it under warm water to wash away dust and particulates. For drinking glasses, these pods work best with libby 16oz style glasses or pilsners. They measure just under 2.5 inches across, so with all of the styles of glasses available there is a large multitude of possibilities. Please note while LiteRays LitePods are water resistant, they are NOT water proof. Please take care to avoid exposing the Litepod to excessive moisture and most definitely do not submerge them under water. Hand wash with a slightly damp cloth only!
What are the uses for LiteRays LitePods? The possibilities are largely limited to your imagination but here are just a few helpful suggestions:
- Use as a wedding plate centerpiece with candy inside or a small flower
- Use as a child's bedside night light
- Use a party or mood lighting
- Use as a light source inside a glass vase or center piece
- Use as a name place holders at a dinner party
- Use as a patio lighting accessory
This
product can be customized with customer supplied images and/or text! Contact us for details.
Make your next special event a unique and memorable one with LiteRays
projection LitePods!
Like this product? We also sell LiteRays shot glasses which are a smaller version of the LitePod with a 2oz shot glass that attaches to the top.
Welcome
to a whole new experience of light! LiteRays LitePods create a delightful design element. They can be used as a table center piece or a one of a kind coaster with your drink!
To
assemble:
1.- Place
film into the bottom unit. You may need to adjust orientation for proper
projection.
2.- Place
LitePod into bottom unit with light facing down into the bottom unit.
3.- Attach
upper unit to top of LitePod and make sure there is a secure
fit.
*Note:
Make sure that both pieces fit securely together before use. When assembled,
the bottom unit is water resistant but not water proof so please take care to
avoid getting moisture in the bottom unit.
To turn
on:
Push down
on the top of the pod to turn the unit on to the first color. A second push
will turn the unit off. Continued pushes will take you through the 8 color
variations. Note: batteries may be replaced by removing the foam around the
electronics for access.
Care and
usage: (DO NOT WASH THE FULLY ASSEMBLED UNIT)
To wash,
the upper unit must be removed from the LitePod and HAND WASHED on its own. NOT
dishwasher safe! For the bottom unit, remove the film and hand wash. Please
note the bottom unit must be thoroughly dried before adding the film back in.
We
genuinely hope you enjoy your LiteRays products. Please visit onlycube.com to
see other exciting LiteRays designs and product concepts.